FIREFLY PUSH GRIP CLIPS – FTTP & FTTH METAL FIXING CLIPS FOR 0.9MM, 2.0MM AND 3.0MM CABLES
SOFT BITE TO PREVENT DAMAGE TO CABLES
AS USED BY THE LEADING UK PROVIDER OF FULL-FIBRE CONNECTIVITY
FIREFLY PUSH GRIP FIRE CLIP
Specifically designed for fibre optic cables and other small cables (small signal, CCTV and alarm cables) and available in 3 sizes to support 0.9mm, 2.0mm and 3.0mm diameter cabling. (3.8mm dia clip is in development). Firefly’s ingenious Push Grip Clips are fast proving popular as the perfect solution with new regulations prohibiting the use of plastic clips, plastic cleats or glues in fibre optic cable installations.
For more information on Firefly fire-safe fibre optic cable clips or on our distribution partners located near you, please contact DAVID BANKS (Firefly Senior Design Engineer) on 07860 629523 or complete the enquiry form below
FFPGC
NEW
Firefly Push Grip clips for fibre optic cabling – design engineered, single component, taper lock system and practically invisible when installed. They can also be used to fix other small cables (small signal, CCTV and alarm cables).
- Super-fast fix in 6 seconds using just finger or thumb pressure
- 100% compliance for FTTP & FTTH
- Support 0.9mm, 2.0mm and 3.0mm diameter cabling (3.8mm dia in development)
- Soft bite to prevent damage to fibre optic cables
- Single component, taper lock system in white finish spring steel
- Optional fitting tool for tight corners eg wall-ceiling joins
- Super-strong substrate grip
- Melt point >1300°C
Push Grip 0.9mm: FFPGC09
0.9mm dia Drill bit size 3 Sold in 50s
Push Grip 2.0mm: FFPGC2
2.0mm dia Drill bit size 4 Sold in 50s
Push Grip 3.0mm: FFPGC3
3.0mm dia Drill bit size 5 Sold in 50s
Push Grip 3.8mm:
3.8mm dia In development
Optional Tool: FFPGC-Tool
For tight angles where fingers don’t reach Sold singly
BROWSE OUR FULL CATALOGUE AT BASE OF THIS PAGE
BS7671:18th Edition (Premature Collapse) AND BS 6701 2016 + A1:2017 (Telecommunications equipment and telecommunications cabling) require ALL cables in ALL areas to be supported by a metal fixing.
These cover all of the following for Cat 6A, Cat 6, Cat 5e, Optical Fibre
and MER/SER specifications:
- Internal and External installations
- Installations to support analogue and digital services
- IP networks
- CCTV schemes
- Local authority LANs
- WANs
- Disaster recovery schemes
- Mission/safety critical industrial control system
In all fibre cable installations, BS6701 A1:2017 is governed by BS7671 18th Edition.
FIREFLY STEEL CLEATS REPLACE PLASTIC CLEATS
Firefly fire resistant support cleats are designed to save lives, where plastic cleats would normally melt. Our metal cleats range match and replace existing plastic cleats Nos 5 to Nos 20 (10mm – 50mm diameter) and are attached using a fast-fix concrete screw. The whole Firefly fibre optic range is corrosion resistant and is quick and easy to install.
Additionally, we also supply a range of uniquely designed adjustable cleats.
- Super-strong substrate grip, including brick, concrete and wood
- Fast-fix Installation using single component concrete screws
- Soft bite to prevent damage to fibre optic cables
- Can be used to fix other cables
- Support 10mm to 50mm diameter cabling
- Melt point >1300°C
Firefly FIXED Cleat: See Catalogue spec
Firefly FAST-FIX Cleat: See Catalogue spec
Firefly ADJUSTABLE Cleat: See Catalogue spec
FIREFLY ADJUSTABLE CLEAT – NEW
CODE RANGE: FFAMC-HD
SIZES: 35mm – 50mm
COLOURS: Black
FIREFLY FIXED CLEAT – NEW
CODE RANGE: FFMC
SIZES: 10mm – 50mm
COLOURS: Black
FIREFLY FAST-FIX CLEAT
– NEW
CODE RANGE: FFAMC
SIZES: 12mm – 35mm
COLOURS: Black, White
Browse our full catalogue of fire safety clips and cleats
Firefly has the largest range of fire safety clips and cleats in the UK to suit all sizes and types of cabling.
Full solutions for all environments.
ZOOM TIME! Book a one-to-one with our design Team - right here >>
